Sunday, July 28, 2013

DIY Spiral Proccessing Tank for Cine Film (Updated)

Followers of my blog will have seen that I've recently been experimenting with home-processing super 8 cine film. So far I've been cutting off short strips and developing these inside a Paterson tank (designed for processing stills films.)

As my tests continued, I felt the need to step up to processing longer lengths of film. Over the last few months, I've been thinking about how to achieve this; to get cleaner results and be able to process lengths of up to 50 feet of film at a time. One can go on to a popular auction site and find old second hand 'Lomo tanks', but these seem to cost around £150 for the 50 foot version ... a lot to pay for a piece of soviet-era bakelite that might well turn out to be incomplete or broken on arrival.

Based on photos I've seen of the old Lomo tanks and using readily-available materials, I set about making a 'Lomalike' tank... After a few false starts and dead ends, here's the current state of the project is in all its DIY glory...



The most complex part of this project was creating a spiral to hold 50 foot lengths of the cine film.

I found that 5mm x 1mm flat aluminium craft wire could be bent into the right shape with the aid of foam strip 'formers'  to temporarily fill the gaps between the wire loops.
The spiral fits neatly inside my chosen processing tank.
The tank is a re-purposed old 35mm film can.

On the underside of the lid, there's a 'low profile' aquarium strainer with an old lens cap glued on to it. This arrangement enables liquids to be poured in without light leaking in too.
A funnel push-fits onto the aquarium strainer in the centre of the lid for adding liquids quickly; a keg tap fitted to the side for draining out the liquids (not so quickly)

I made my first use of the tank last night, processing about 37 feet of B&W negative film using the same Caffenol C-M developer recipe as before. This is the remaining film of the cartridge I'd been developing for my previous tests, so a good length, but not a full roll. There was space for more film though, so if my measurements are correct, the spiral should be able to take a full 50 foot load.
 
LOADING: Getting the film on to the spiral has to be done in darkness (my loft) and was a little fiddly at first. After about 20 minutes I'd done it; evolving a technique of feeding the film from the cartridge, rotating the spiral gradually and pressing down on the spiral to keep the film in place during the loading process. All I'd read about loading the real Lomo spiral helped; the film is perfs down, and emulsion out, and holding the cartridge at a 45 degree angle seemed to help too. Once the film was on the spiral, I put the spiral in the can and taped up the sides of the can with black tape to keep it light-tight. The rest of the processing took place in my kitchen, under subdued lighting, but not total darkness.

PROCESSING: The tank requires 1 litre of developer to adequately immerse the 8mm film. Pouring in the developer solution was pretty fast, I could get a litre of the stinky brown liquid into the tank in around 15 secs. There's no device for agitating the tank here, so I just gently rocked the tank to move the developer about during the first minute then a little bit more every minute thereafter for the 15 minute developing time.

Drainage of the tank using the keg tap is slow. I found that I needed to gently incline the tank whilst draining, but not too much, because the sides of the film can are definitely not water tight. Drainage took about a minute.

I followed the developing stage with a water stop bath, then standard Hypo fixer. I kept the film on the spiral for washing and drying too.

SUMMARY:  The developing tank works!  There are pictures on the film, but until I can digitize the film it'll be hard to assess the quality of this arrangement. The real test will be to see if the developing is even and whether the spiral has introduced any marks along the film. So at the moment, it's a qualified success. The design could benefit from a faster drainage system and perhaps the spiral could use some kind of top-piece to hold the film down into the grooves (The real Lomo tank has a top plate for this). However, the film did stay in place throughout the developing and only started floating off the spiral during some over-zealous tap jetting during the final wash process. The edges of the can are not watertight, but if the tank is kept level during processing and only gently and gradually tipped during drainage, this doesn't seem to be a problem.

UPDATE: 
Tonight I've just put a whole 50foot cartridge worth of film into the tank for processing in Caffenol C-M again, (same recipe as before). I've had a NIGHTMARE loading the tank the second time... It all went wrong when I somehow let the end of the super 8 film disappear back inside the cartridge... This meant that I needed to take tools into the dark to try and hack open the cartridge, then I had a roll of film snagging and not dispensing easily... I must have had beginner's luck the first time I loaded the spiral (about 20 mins) because this time I was in the dark for well over an hour. They say you learn by your mistakes, what a lesson! I put this note here in the hope that others might learn this the easy way.  However, once loaded the processing went well.

MODIFICATION:
I made a small modification to the tank this time; a strip of plastic to go on top of the film. This was easy to add, but meant that the film stayed in place on the spiral even during quite vigourous washing and drying of the film. Luckily I'd already made the centre spindle a short M10 sized bolt, so I could use a nut to hold the plastic in place...



The new top bar kept the film in place this time, so I could be a little more vigorous with the washing and drying of the film.

SOME RESULTS: 
I've added below some stills of the first batch of film to show the results...

I put the film strip on a lightbox and took a few photos. The left side of each image shows the film negative as processed (with a few Levels tweaks), the right hand image shows the image digitally inverted back to positive. These images will look slightly squeezed, due to an anamorphic lens being used during filming.

The first part of the film was some titles and text animation tests.

The new cable car across the Thames

View from the cable car of post-industrial sprawl.

The wonderful 'Egyptian' façade of the old Carlton Cinema in Islington.
 I'm actually quite encouraged by the results, there's certainly a usable image there, I was expecting more blotchy and irregular results than this.

I also took a few stills of individual frames. This is extreme macro photography, the images on the film are only about 5mm wide. For these stills, I stretched the images back to the correct 16x9 aspect ratio to 'undo' the effect of the anamorphic lens adaptor.







COMING NEXT: I'm planning to digitize and check the results of this film, then shoot and process some further rolls of B&W negative. If all goes well, I hope to be trying some colour processing and maybe some 16mm film sometime in the future...



UPDATE 28/12/14

OK, I've now completed a couple of short film projects using this DIY developing technique, so for those wanting to see some results, here they are...

CABLE CAR (2013)

THE SECRET NUCLEAR BUNKER (2014)

I've now invested in a large film changing bag and have found this a much more comfortable way to load the spiral than locking myself away into my attic space! I processed some 16mm (BW Neg) film today with this tank (again using Caffenol C-M developer) and can confirm the spiral happily takes this wider film too. I think I'm getting about 60 feet on there, not the full 100 foot roll unfortunately...

UPDATE 31/03/15

Well I did process some 16mm BW neg film in the same spiral tank too. This is a roll of BW Kodak 'Surveillance' film I shot on Constantine beach in Cornwall. Again I processed this using the Caffenol C-M DIY developer recipe as used on the Super 8 films before. I have no way (yet) of digitizing 16mm movie film, but here are a few stills I shot putting the processed film on a lightbox. (Photoshop levels and inverting back to positive images.)



UPDATE 06/01/20

WELL 5 YEARS LATER... I've finally digitized this 16mm home developed footage. I've just found this roll of film again after losing it for a long time! I've also been working on a DIY frame-stepping device to help me digitize the 16mm footage.

CONSTANTINE BAY (2020)

Friday, July 05, 2013

Wall of Death : Super8 film DIY processed/digitized



Here's a little experimental film. Super 8 cine footage of the Ken Fox Wall of Death Troupe doing their death-defying thing in Enfield in May 2013.

I shot black and white negative film because I wanted to try some home processing. This film was developed in short lengths using Caffenol C-M developer.

The film was digitized in various ways, partly with a flatbed scanner, but mostly using a DSLR camera and macro optics to re-photograph the tiny frames. Some of the film was advanced by hand under the camera, and some strips were moved using a stepper motor/sprocket wheel mechanism I've been working on.

Tuesday, July 02, 2013

'Gromit Unleashed' Film for Simon's Cat

Here's a new video I've just shot/edited for Simon's Cat Ltd. Here, Simon Tofield is seen bringing his unique illustration talents to bear on a gigantic fibreglass Gromit sculpture in aid of the 'Gromit Unleashed' campaign.

Tuesday, June 18, 2013

'Tango Dancers' film for Mr. Plastimime


Here's the fifth webisode of the Behind The Scenes series I've been shooting/editing at TANDEM in support of Daniel Greaves' Mr. Plastimime project.

Tuesday, June 04, 2013

More Adventures in CAD

For the last few weeks, I've been getting to grips with a trial version of Geomagic Design (formerly known as Alibre).

This is a CAD package that goes a lot further than the free Autodesk 123D Design I've been using previously. The main advantage seems to be the parametric structure to the programme which allows each part to have a complete history of non-destructive changes. Parts are initially designed separately, then brought  together to create an assembly. There are lots of alignment and constraint tools available to do this to a high degree of accuracy.
 
My plan is to at least learn at least enough CAD to be able to draft my projects and have them 3D printed from time to time. Here we see a plan for a very simple (and probably somewhat naive) device to help me digitize 8mm movie film. I've been messing about with something like this made of card and foamboard, so getting it made in plastic ought to be something of an improvement.
 
Geomagic DesignCAD drawing of assembly. Motor, sprocket, film channel and film strip combined.

So it's a stepper motor with a sprocket wheel attached and a film channel to guide the film through. Maybe not rocket science, but it's a mechanism and will need to be made with some precision if it's to work in any way at all. One day I'd like to 3D print this at home, but in the meantime, it's off to Shapeways.com with my .stl files again... 

CAD drawing of 25 tooth sprocket wheel to fit on motor shaft.
CAD drawing of film channel (guides the film by its edges) and housing for motor.

Monday, June 03, 2013

Serving Fine Web Pages For 17 Years








































Big thanks to old friend (and painter of visions) Nicholas StHelier. He's dug out an old postcard I made back in 1996. It's a calling card I used to give out to people to invite them to come and see my website.

Those were very different times...

The Tall Story Hotel was hosted on the free webspace I got with my dial up internet account from Pipex. Thus the snappy URL you see here. Looking up my record on whois.com it looks like I didn't register the chrisgavin.com and chrisgavin.co.uk domains until a few years later (May 5th 1999.)

Of course the link on the postcard is long dead now, but the page you are reading this on now is the descendant of that first site. The code, graphics and hosting service have been changed many times since of course. The current version of www.chrisgavin.com isn't really a proper website at all in the old sense; since August 2005, this has just become a sprawling collection of Blogger pages.

It was quite exotic to have your own website back in 1996. I must have been quite an early adopter. A year or two later I bought one of these too. Quite the dotcom boomer!

Back of the postcard, yep there it is ... 1996 !!!





Wednesday, May 29, 2013

My Most Exciting 5 Feet Of Film Ever

What could be more thrilling than seeing the daredevil stunt riders of the Ken Fox Wall of Death in action this weekend?

Well, supposing I captured some of the action with my Nizo super 8 camera using some black and white negative film. Then suppose that a mere 2 days later I wait 'til it's dark, sneak into my loft and put about 5 feet of the film loosely into one of my dad's old Paterson developing tanks. Then, maybe I head down to the kitchen and mix up 500ml of Caffenol C-M film developer (instant coffee, washing soda, vitamin C & water), process the film (15 minutes), water stop bath (5 washes), Hypofix (10 minutes), wash (10 minutes) then fast dry the film with a hair dryer.

Then just supposing there were actually some pictures on the film strip... How exciting would that be?

Well tonight, that's exactly what happened...


This is the first time in a very long time that I've processed any film of any kind. It's certainly the first time I've processed any cine film, and most definitely the first time I've processed film using a coffee-based film developer. (Co-op Fair Trade Instant if you're asking).

This first test film was just jumbled up willy-nilly inside the Paterson tank, but it certainly proves the chemistry works. Of course it would be better to use a proper cine processing tank, especially for developing a whole 50 foot (15 metre) cartridge in one session.

Once I had my 5 feet of  hand processed film, I then put it on my light box and took a few close-up stills with my DSLR camera and some macro rings. This is hardly the best way to get a telecine done, but at least this way, I can show some of the results.



DIY 'Caffenol C-M' processed BWneg super 8 film

DIY 'Caffenol C-M' processed BWneg super 8 film, inverted to positive and some levels applied.





It's very late now, but of course I couldn't resist putting a very short movie together out of these first few frames ...



I just couldn't be more encouraged by this first test. I hope I can digitize the whole 5 foot strip to show soon and I'm now very keen to process the rest of this reel with this chemistry. So much more to do with this...

Saturday, May 25, 2013

Spiral 002



Here's what that 8mm film developing spiral might look like.. .should somebody try to CAD model it in Geomagic Design...

I'm currently trialling this software and making some progress with it... The most basic version of this software is called Geomagic Design (Personal Edition), and I'm thinking this is a pretty good tool for this kind of work, and certainly a whole lot better than the Autodesk 123D Design (free) application I've been using so far.

This model is the lower half of the film spiral only. There will need to be a top plate to keep the film held in place, but that part will be of a much simpler design.

I uploaded this as an .stl file to Shapeways.com, the estimated price to make this part would be about £80. Just at the moment this seems a little bit too much to spend on this project, so I'm hoping to find a service / 3D printer owner who could help me make this for a little less.

Wednesday, May 22, 2013

This Is Me On French TV!

Veuillez installer Flash Player pour lire la vidéo

Well, let's say it's a very select group who have discovered my typographic web series The Futura Gold. Fortunately, amongst the people who have found it, were the team who put together L'Oeil de Links; a rather special TV show about web creativity shown in France on the CANAL+ channel.

A couple of weeks ago I got an email from Jeff Tinard the scheduler for the show, asking if they could broadcast my films and record a Skype interview with me. The resulting programme was broadcast yesterday and I'm pleased there's already an online record of the show on the CANAL+ website. The clip above gives an excellent introduction to the history of the Futura typeface, then follows with Episodes 02 and 03 of The Futura Gold complete with an interview with the director. Hmm, is that really me grinning like a madman through all this?

Thursday, May 16, 2013

Adobe indulges in 'Creative' Pricing $ to £

I've spent the afternoon trying to work out what the Adobe 'Creative Cloud' software subscription service means for my workplace, and it's really not good.... 

First up, there's this... 

Adobe CreativeCloud for Teams $69.99/user/month (for US customers.) 
Adobe CreativeCloud for Teams £65.44/user/month (for UK customers)

Erm, same software, same cloud storage (which we don't actually need), yet at normal exchange rates that's $100.17/user/month for UK users. A price hike of 153% for us Europeans. For a cloud service how can Adobe possibly justify this market segmentation?

Well on Adobe chat today this was how that bit went...

Adobe spokesperson: We understand your concern. We want to make sure that we are giving our Customers the best products and at the right price. Although Adobe Europe and Adobe US are different parts of the same global company, European Marketing strategies and pricing are not directly related to those used for the US. The prices are not simply converted from the dollar pricing used for US products, therefore the pricing used for each country in the EMEA region may vary.
 

And there's more... oh yes, a lot more ... 

Sunday, April 28, 2013

New Spiral

Pretty soon I'd like to try DIY processing some cine film for the first time. Processing stills film is pretty straight forward, but super 8 cine film comes in 50 foot (15 metre) lengths. This is not going to fit inside a Paterson tank and anyway, there just don't seem to be any 8mm film spirals either.

Folks seem to use Russian Lomo spiral tanks to do this, but I can't quite bring myself to send lots of good money away to buy a hunk of soviet-era bakelite from ebay. I'm guessing that many of the available tanks will be broken or have bits missing by now.

So what about designing the vector graphics for a new spiral and having it made from plastic? I would think this could be a job for a laser cutting or 3D printing service.
It might look something like this...

By my calculations this would need to be about 220mm in diameter, the channel for the film is 1mm, as are the ridges between the winds. This is a theoretical design, but who knows if this would work, or if the film could actually be loaded into such a thing? The next step will be to find a cutting/making service that could make this up for me at a reasonable price. Please comment below if you know of such a service.


Wednesday, April 24, 2013

Sumix 150M industrial camera tests again.

camera Sumix 150M, c-mount Fujinon TV zoom lens f1.8 17.5-105mm


Working late in the lab again tonight trying to see if my old Sumix 150M industrial camera can be used as a webcam (for an interview request), but it doesn't look like it can be. I bought this off ebay years ago; it's a curious little camera module for scientific/industrial uses. The Sumix 150M can shoot stills or video at up to 1280x1024 size; but only in monochrome. The Sumix camera capture software has lots of controls that you just don't get with consumer oriented gear. 


Also, the camera can take C-mount lenses and I was intrigued by the macro possibilities of the camera using some extension tubes. My goal was to try to capture frame by frame 8mm cine images from the gate of my cine projector, now that I look at it again, I wonder if that might be worth another try...

For all it's specifications though, I don't think it'll work with Skype...

Anyway, below are some test captures I made with the camera back in the day. Mostly macro photos using more and more extension tubes until I got down to the required 5mm or so image size of the 8mm film frames. I gave up with the super 8 capture experiments, but I did end up using this strange camera to shoot all of the stop motion elements for my film TXT ISLAND.

The camera is tethered to the PC by USB, so only able to take pictures of things nearby!
camera Sumix 150M, c-mount 50mm lens with extension tubes.
With a few extension tubes, macro photography becomes possible.
Some desktop clutter, surprisingly sharp.
Using rulers to show scale here.

And in we go until our image is 5mm wide.

An actual super8 frame.
Another actual super8 frame.

Sunday, April 21, 2013

I've been too busy working on something at TANDEM the last few weeks, so there's just not been any time for  DIY film-making activity at home recently.
However, when I get a little spare time I'm going to try some of this in my Super8 camera.


It's 50 feet of black and white negative film. I'm hoping to try out some DIY film processing and figured that this BW negative would be the easiest type of film to start with. Processing is similar to BW neg. stills film, with affordable chemistry at room temperature. I'm also very intrigued with the idea of 'Caffenol C' processing... Yep, that's film developer made from coffee!

Tuesday, April 02, 2013

Some Maths For Animators

Here's a little real word maths problem that's just come my way...

A stop motion animator is moving something on set by 25mm for each frame taken to create movement at a steady speed. Over the next 20 frames he wishes the movement to decelerate smoothly until a rate of 10mm per increment is achieved.
Calculate the distance the object is to be moved for each of the 20 inbetween increment positions to achieve a smooth deceleration.

Well, it's taken me a few hours over this Bank Holiday weekend, but I think I've worked out the solution for this in time for tomorrow's shoot. I've drawn on some school maths and a few Excel spreadsheet tutorials, but I've knocked up a calculator that can figure this out. i.e. Calculate the in-beteweens and print out charts (to scale) for the animator to use as fairing rulers on set. The sine wave based equation I've developed, spits out these figures for the increments.


Maybe this graph looks pretty, but it wont help the animator too much...

I've then added another column to the spreadsheet to aggregate these figures and give the actual (cumulative) measurements in mm.

I eventually found that Excel's 'Scatter Graph' could be formatted to give something like a useful chart, which when printed to the correct scale can be used on-set as a useful ruler.



So this is very basic stuff for anyone involved in the science of Motion Control, but I offer it here in the hope this might come in handy for anyone (like me) needing to work this out for themselves.

Oh, and the answer to the question is...
25, 24.9, 24.6, 24.2, 23.6, 22.8,21.9, 20.9, 19.8, 18.7, 17.5, 16.3, 15.2, 14.1, 13.1, 12.2, 11.4, 10.8, 10.4, 10.1, 10.0 (mm)

Saturday, March 23, 2013

Digitizing Dad's Slides


Click on this to see the whole 4824x2714 image. Photos circa 1977 ©Michael Gavin

I've borrowed some of my dad's Ektachrome slides (circa 1977) and been re-photographing them with using a Canon DSLR camera. I'm using an A3 sized lightbox and a borrowed Kaiser rostrum stand to do this.

To get clear photos of each slide, I've been using an old 50mm f1.8 Pentacon M42 fit lens and one short macro extension tube. (I'm guessing this very same lens was used to take some of these pictures too.) With this arrangement, each 35mm slide image can mostly fill the frame of the Canon 600D (1.6x crop-sensor) DSLR. I've been copying each slide as a Raw file, allowing a little bit of colour and exposure tweaking; I've also been Photoshopping out a few dust spots and hairs from the slides along the way.

This seems like quite a quick solution for capturing the images from slides, but I'd still like to try some tests with my scanner's film adaptor for comparison.

Photo of me circa 1977 ©Michael Gavin


Thursday, March 07, 2013

TXT ISLAND is a Vimeo STAFF PICK

My 2009 short film TXT ISLAND has just been selected by Vimeo as a STAFF PICK.


+++ UPDATE 08/03/13 +++

After a day or so, I can say that having this film selected by Vimeo has come as a very nice surprise. Although the film has been online for three years with only a trickle of views, it suddenly spiked to around 12000 views in the 24 hours following the selection. The film has received a good few hundred Vimeo 'likes' and 'followings' too. Many thanks to all those who've supported the film and helped 'spread the word' by adding it to their blogs and sites etc.

Oh, you've seen the film ... now buy the T-shirts!